WHITWORTH WATER DISTRICT 2 vs SEATTLE PUBLIC UTILITIES
Water quality comparison — risk levels, violations, PFAS records, and contaminants
Quick Answer
SEATTLE PUBLIC UTILITIES has a lower risk classification (safe). WHITWORTH WATER DISTRICT 2 has 0 open health-based violations and 522 PFAS records. SEATTLE PUBLIC UTILITIES has 0 open health-based violations and 232 PFAS records.
Washington · WA5396601
Low Concern
Minor detections below regulatory limits. Routine monitoring adequate.
0
Open violations
522
PFAS records
Washington · WA5377050
No Concerns Detected
Water meets all safety standards with no detected exceedances.
0
Open violations
232
PFAS records
Head-to-Head Comparison
| Metric | WHITWORTH WATER DISTRICT 2 | SEATTLE PUBLIC UTILITIES |
|---|---|---|
| State | Washington | Washington |
| Risk Level | Low Concern | No Concerns Detected |
| Population Served | 26,883 | 1,161,961 |
| Open Health Violations | 0 | 0 |
| Total Violations | 98 | 1 |
| PFAS Records | 522 | 232 |
| Ownership | Local | Local |
| Service Type | Groundwater | Surface water |
| City Served | — | Seattle |
Contaminants in Violation Records
WHITWORTH WATER DISTRICT 2
- Bromate
- Total Coliform
- Fecal Coliform
SEATTLE PUBLIC UTILITIES
No named contaminants in violation records.
Key Differences
WHITWORTH WATER DISTRICT 2 has a low risk rating vs. safe for SEATTLE PUBLIC UTILITIES.
WHITWORTH WATER DISTRICT 2 has 522 PFAS records vs. 232 for SEATTLE PUBLIC UTILITIES.
What Should I Do?
If either utility shows open violations or elevated PFAS records, consider:
- Installing a reverse osmosis filter — removes PFAS, lead, arsenic, nitrates, and most heavy metals.
- Requesting your utility’s annual Consumer Confidence Report (CCR) for the most current test results.
- Ordering a certified lab water test if you want contaminant-specific data for your address.
Frequently Asked Questions
Which is safer — WHITWORTH WATER DISTRICT 2 or SEATTLE PUBLIC UTILITIES?
SEATTLE PUBLIC UTILITIES has a lower risk classification (safe). SEATTLE PUBLIC UTILITIES has 0 open health-based violations compared to 0 for the other system.
What does "open health-based violation" mean?
An open health-based violation means a water system has exceeded an EPA Maximum Contaminant Level (MCL) or failed to meet a treatment technique — and the violation has not yet been resolved. These are the most serious type of water quality violations.
How current is this data?
Violation data comes from EPA's Safe Drinking Water Information System (SDWIS), which is updated as utilities report. PFAS data comes from EPA's UCMR 5 monitoring (2023–2025). Risk levels are recalculated daily.
What does PWSID mean?
PWSID stands for Public Water System ID — a unique federal identifier assigned to each community water system. You can use it to look up a system in EPA's ECHO database.